IRGC5B60KB www.irf.com 04/19/02 die in wafer form mechanical data electrical characteristics (wafer form) die outline nominal backmetal composition, (thickness) al - ti - ni/v - ag, (1ka - 1ka - 4ka - 6ka) nominal front metal composition, (thickness) 99% al/1% si, (4m) dimensions 0.090" x 0.115" wafer diameter 150mm, with std. < 100 > flat wafer thickness, tolerance 85m, +/- 7m relevant die mechanical dwg. number 01-5513 minimum street width 100m reject ink dot size 0.25mm diameter minimum ink dot location consistent throughout same wafer lot recommended storage environment store in original container, in dessicated nitrogen, with no contamination recommended die attach conditions for optimum electrical results, die attach temperature should not exceed 300c parameter description guaranteed (min, max) test conditions v ce (on) collector-to-emitter saturation voltage 1.0v min, 1.25v max i c = 1a, t j = 25c, v ge = 15v v (br)ces colletor-to-emitter breakdown voltage 600v min t j = 25c, i ces = 1ma, v ge = 0v v ge(th) gate threshold voltage 3.5v min, 5.5v max v ge = v ce , t j =25c, i c = 250a i ces zero gate voltage collector current 10a max t j = 25c, v ce = 600v i ges gate-to-emitter leakage current 1.1a max t j = 25c, v ge = +/-20v e c g 600v i c(nom) = 5a v ce(on) typ. =1.8v @ i c(nom) @ 25 c motor control igbt short circuit rated 150mm wafer features features features features features gen5 non punch through (npt) technology low v ce(on) 10 s short circuit capability square rbsoa positive v ce(on) temperature coefficient benefits benchmark efficiency for motor control applications rugged transient performance excellent current sharing in parallel operation qualified for industrial market reference standard ir package part: irgs5b60kd gat e 1.88 [.074] 1.30 [.051] 0.64 [.025] 0.66 [.026] emitter 2.29 [.090] 2.92 [.115] 1. all dimens ions are s hown in millimet ers [inches ]. 4. dimensional tolerances: 3. lett er des ignat ion: 2. controlling dimension: [inch]. not es : widt h < [.050] tolerance = + /- [.004] > [.050] tolerance = + /- [.008] > 1.270 t olerance = + /- 0.203 & length > [.0250] t olerance = + /- [.0010] > 0.635 t olerance = + /- 0.025 < [.0250] t olerance = + /- [.0005] < 0.635 t olerance = + /- 0.013 < 1.270 t olerance = + /- 0.102 & length overall die: wi dt h bonding pads: sk = source kelvin is = currentsense g = gat e s = source e = emitter pd - 94408
|